METRAHIT Asi v3.0

• Complex slaves with high operating current up to 150 mA can be addressed without external power supply.
• Long operating times
• Simultaneous indication of input and output states with the extended 8-place display, thus resulting in more clear-cut and faster input and output testing at systems
• Intuitive acquisition of process values with display of data as either binary, decimal, hexadecimal or percentage values
• Universal use with standard AS-i and AS-i Power24V systems

• Quicker initial start-up thanks to simplified work steps during slave address setup and automatic read-back of the selected address
• Ready for use in less time because the addressing cable functions without securing it to the M12 socket with screws
• One-hand operation in time-tested compact housing with easy-to-actuate keys and rotary switch

The METRAHIT ASi v3.0 is used to assign addresses to AS-interface slaves during initial start-up. It detects connected slave modules or entire AS-i networks, which then appear at its display. Each address is selected individually with the up and down keys. Additional initial start-up functions are selected with the rotary switch. The new METRAHIT ASi v3.0 supports the current AS-i V3.0 specification and the I/O data of the most up-to-date slaves. The display has been extended to a total of eight places and current-carrying capacity has been increased by 50%, in particular for motor starters with AS-i and analog modules.

• Operating Instructions (PDF | 691.4 KB)
• Technical Data (PDF | 394.2 KB)
• Short-form Operating Instructions (PDF | 520.8 KB)
• CE-Zertifikat (608) (PDF | 262.8 KB)